UH-SC-AC Acidic Stone Cleaner 5L

UH-SC-AC Acidic Stone Cleaner 5L — Deep Cleaning for Tough Stains

The Ultra Hygiene UH-SC-AC is an industrial-strength acidic stone cleaner designed to tackle the toughest stains on acid-resistant stone surfaces. It effectively removes rust stains, mineral deposits, efflorescence, cement residue, and stubborn discolouration from granite, terrazzo, quartzite, and similar hard stones.

Important: Not for Marble or Limestone

This product is acidic and must NOT be used on marble, limestone, travertine, or other calcium-based stones. Acid will etch and damage these surfaces. For marble and limestone cleaning, use the UH-SC-AL Alkaline Stone Cleaner instead.

• 5-litre container for large-area cleaning projects
• Removes rust stains, mineral deposits, and efflorescence
• Dissolves cement residue and grout haze on stone
• Dilutable for different stain severity levels
• Suitable for granite, terrazzo, quartzite, and slate
• NOT for use on marble, limestone, or travertine

Dilution Guide

For light cleaning and maintenance, dilute 1:10 with water. For moderate stains, use 1:5 dilution. For heavy rust stains and stubborn deposits, apply at 1:3 or use undiluted on small areas with a dwell time of 5-10 minutes before scrubbing.

Pre-Restoration Cleaning

The UH-SC-AC is commonly used as a pre-treatment before diamond polishing on granite and terrazzo floors. It removes embedded grime and stains that diamond pads alone cannot address, ensuring the restored surface is uniformly clean.

Key Features